Pb(II) Removal Using TiO 2 -Embedded Monolith Composite Cryogel as an Alternative Wastewater Treatment Method

Abstract

Different from direct application of free nanoparticles (NPs) in water treatment, a composite material is used to reduce the release and potential toxic effects of NPs with maintained adsorption capacity and kinetics. Novel monolithic composites with TiO₂ NPs incorporated into the walls of macroporous cryogels were synthesized and evaluated for material characteristics and their efficiency for removal of Pb(II) from aqueous solution in batch test and continuous mode. The uniformly distributed 6% TiO₂-cryogel is shown to be optimal for minimizing TiO₂ NP losses while maximizing Pb(II) removal. Under (25.0 ± 0.1) °C with the initial Pb(II) concentration of 10 mg/l, TiO₂-cryogels exhibit excellent adsorption characteristic for Pb(II) removal with adsorption capacity up to 23.27 mg/g TiO₂, which is even a little higher than that of TiO₂ NPs (21.58 mg/g TiO₂), and the results fit well with Langmuir–Freundlich isotherm. Both adsorbents work well in higher pH range with the highest removal rate at pH 6 for TiO₂-cryogel, and the adsorption mechanism might be strong chemical interaction. Pseudo-second-order process can better describe the adsorption process rather than pseudo-first-order for both adsorbents. The external mass transfer process of Pb(II) on TiO₂ NPs is much faster than that on TiO₂-cryogel, and the ultimate equilibrium time is about the same (3 h) on both adsorbents. The synthesized composites could also withstand a continuous treatment, and the effect of competing and co-existing constituents such as Cd²⁺, SO₄²⁻ and dissolved organic matter (DOM) is almost negligible. The composite design with small particles embedded into cryogels is proved to successfully keep the adsorption activity of TiO₂ NPs and prevent them from releasing into the environment in engineering practice.

from #ORL-AlexandrosSfakianakis via ola Kala on Inoreader http://ift.tt/2eVnCYh