Effect of the carbon dioxide 10,600-nm laser and topical fluoride gel application on enamel microstructure and microhardness after acid challenge: an in vitro study

Abstract

The aim of this in-vitro study was to evaluate positive effects of the carbon dioxide laser (CO₂, 10,600 nm) with acidulated phosphate fluoride (APF) gel on enamel acid resistance. Twenty extracted human third molars (40 surfaces) were randomly assigned into four groups: group C, untreated control; group L, CO₂ laser alone group; group F, APF 1.23% fluoride gel; and group FL, APF 1.23% gel and laser. Samples from group L were irradiated with a CO₂ laser for 30s. The parameter settings used were average power, 0.73 W; time on, 100 μs; time off, 40 ms; tip-to-tissue distance, 20 mm; tip diameter 700 μm; and energy density with movements, 5 J/cm². Samples from group F were treated with the APF gel for 4 min, and the gel was washed off with distilled water. The enamel samples from group FL were treated with APF gel for 4 min and then irradiated with the CO₂ laser for 30s without removing the gel. Each enamel sample was placed in 50 ml soft drink (pH = 2.75) for 10 min then rinsed with deionized water and stored in artificial saliva at 37 °C for 1 h. Samples were assessed for Vickers hardness number (VHN) before and after treatments and subjected to SEM analysis. Data were analyzed using a one-way analysis of variance (ANOVA) and Tukey's test (α < 0.05). After the acid challenge, the untreated C group was demineralized to a great extent and the enamel surface was with the lowest mean score of microhardness. The observed VHN in the control (C group) had a mean value of 176.13, the scores in the CO₂ laser group (L group) were with mean value of 238.40, the F group with a mean value of 218.45, and the fluoride-treated and laser-irradiated FL group—with a mean of 268.28 VHN. Paired t test performed to compare groups C, L, F, and FL has shown that group FL has greater resistance to decrease in microhardness of dental enamel (P ≤ 0.05) on exposure to acidic protocol. After the acid challenge, the fluoride-treated and laser-irradiated samples (group FL) showed the least diminution in enamel surface microhardness. The sub-ablative carbon dioxide laser irradiation in combination with fluoride treatment is more effective in protecting enamel surface and resisting demineralization than CO₂ laser irradiation or fluoride alone.

from #ORL-AlexandrosSfakianakis via ola Kala on Inoreader http://ift.tt/2DThFmr